README ADASS2025.tar
Last updated: 2026-01-23 by Peter Teuben


Table of contents
=================

  * Introduction
  * STEP 1: Prepare your manuscript 
  * STEP 2: Check your manuscript
  * STEP 3: Package and submit your paper
  * File index
  * Github
  * Latex


Introduction
============

This package of files is supplied to help you prepare papers for
submission in the Proceedings for the ADASS 2025 conference. It is
part of the package that in the end will produce the full proceedings.

Please follow the stepwise instructions below carefully, because the manuscript 
needs to be delivered to ASP in print quality. The more issues are solved early 
on in the process, the more time we all save.

The instructions below are intended to guide you through the process
of preparing and submitting your contribution. We realise it is a lot
of information and some of it is duplicated. If you need additional
help, please see the list of documents below. From "too much" to "too
little" information, we provide the following help documents in this
tar file (except for your personal template):

   1. manual2010.pdf             (ASP Instructions for Authors and Editors)
   2. ManuscriptInstructions.pdf (Guidelines for preparing an ADASS paper)
   3. README                     (This file) - as well as the README.tldr
   4. ADASS_template.tex         (The general ADASS template)
   5. PID.tex                    (Your personalized ADASS template for your PID, e.g. 193) [optional]

At the end of this README, we also provide a file index with a short
description of all the files that should be present in the
ADASS2025.tar file.


STEP 1: Prepare your manuscript
===============================

The best usage is to prepare your paper in this Author_Template
directory. If you author two papers, that will work too, but preparing
your tar or zip file is much easier if you use a separate
Author_Template directory for each paper.  We advice you to rename
the Author_Template directory to your PID (e.g. 193).

Read the ManuscriptInstructions.pdf file. The ADASS_template.tex file
gives you a basic template for your ADASS paper. For additional
details look in the first section of the ASP's "Instructions for
Authors and Editors" (manual2010.pdf), but note that this is now some
years old and current requirements have changed slightly. In
particular, ADASS papers that cite references MUST supply these
references in a .bib BibTeX file like the example.bib file provided
here.

You will need to run `pdflatex` on your .tex file, then run `bibtex`
to process the references, and then will need to run `pdflatex` again
up to two times to get all the cross-references right. We recommend
that you use the provided Makefile (see next subsection), but if you
prefer building manually that should work as well. Overleaf is also
supported (see below).  ASP now uses pdflatex (no more latex), and
allows JPG or PNG figures (no more EPS).

You can also use the Makefile (be sure to edit the makedefs file) and
type

       make pdf

Editing your paper in overleaf (https://www.overleaf.com/) is also
known to work: simply upload (as a ZIP file is the easiest) the
template, the two asp2021/23 sty/bst files, and optionally your BIB
file and figures. Don't start from scratch, or your file will be
likely named main.tex. See below if you like the "make" shortcuts.

In 2025 we planned to have personalized templates, which would be
based on your abstract in the registration database.  The instructions
within that template are even more terse than in ADASS_template.tex,
so be warned if some of this material is new to you. But alas, this
never happened.

A note about Paper IDs
----------------------

Each paper will be assigned an ID known as a PID. The PID syntax in 2025 is
a 3 digit code, which is your abstract index. 

In this document, we will be using 193 as an example PID.

Using the provided Makefile
---------------------------

We provide a Makefile to help you build, check and package your paper in the 
correct way. To use it, you need to edit the makedefs file in this directory,
or use your personalized one.
In the makedefs file, you can define the P, V, A, E and FIGS macros, for example:

# Your proceedings PID (paper ID) code:
P = O12

# Your version # (1,2,..) since you can only upload unique files
V = 1

# Your last name, e.g. Teuben
A = Teuben

# Your contact email address for submission issues
E = teuben@gmail.com

# Your figures
FIGS = O12_*.jpg

Please edit the makedefs file and NOT the Makefile directly. The entries in the
makedefs file will override the ones set in the Makefile. When set correctly,
you should be able to run the following make commands:

    make pdf      : Build the PDF file (possibly twice to rid some errors)
    make check    : Check the manuscript for issues
    make tar      : Build the tar file for submission
    make all      : Do all of the above
    make overleaf : Prepare a ZIP file to bootstrap your overleaf project

For overleaf users, you can add your modified makedefs file to
complete and track the files you will modify. You can then use
https://git.overleaf.com/<MAGIC_NUMBER> to clone the repo locally, and
merge it with the other files that the ADASS editors have prepared for
you (but you should not modify).  Then you can create the ZIP or TAR
file for uploading your proceedings contribution. You can even bypass
overleaf work and do the usual git pull/push to update, which can be
useful for those who prefer to work on the desktop. But check with
your co-authors to avoid a conflict.

Adding subject index entries
----------------------------

It will help the ADASS editors if you add subject index entries for important
terms mentioned in your paper. The Index.py script can help to generate these,
and full details can be found in an appendix in ManuscriptInstructions.pdf.

In your document they should appear a commented \ssindex{} entries, e.g.

   %\ssindex{foobar}

You can also use the following word-cloud type command chain in unix:

    detex $(P).tex | grep -o -E '\w+' | sort | uniq -c | sort -n

If your "unix" doesn't have detex, use cat.

Adding ASCL index entries
-------------------------

It will help the ADASS editors if you add ASCL index entries for codes that
you are mentioning in your paper. The ascl.py script can help to generate these,
but it known to give lots of false positives. Nonetheless, you can cut and paste
the correct ones (as a latex comment) in your document, e.g.

   %\ooindex{TOPCAT, ascl:1101.010}


STEP 2: Check your manuscript
=============================

Your paper should typeset without generating any LaTeX errors or warnings. 
Overfull hbox warnings in particular need to be fixed. (In some cases underfull
hbox and vbox warnings may be tolerable.)

The 'make check' command runs a python script which looks for a number of common
problems that have been found in submitted papers. You should run it on your
paper before packaging it up for submission, and should fix any problems it 
finds. This test is a copy of a basic paper checking program that will be run 
by the ADASS editors on all submitted papers.

It is also possible to run the check manually with the PaperCheck.py script. The 
header comments in PaperCheck.py describe how to run it in detail, but essentially 
all you have to do is:

    PaperCheck.py Paper Author

where Paper is the identifier for your paper, eg O10-3 or P8-2 etc, and
Author is the surname of the first author of the paper.


STEP 3: Package and submit your paper
=====================================

You should create a .tar file with a name based on the identifier for your paper and 
including a version number, starting at 1.
e.g. example O12_v1.tar. This should contain:

  - The .tex LaTeX file
  - The .bib file defining any cited references
  - And .jpg (or .png) graphics files used by the paper
  - The makedefs file 
  - The resulting .pdf file for the paper, so we can see how you got it.
  - A signed copyright form.

The provided Makefile could help you to build, check and package the paper. 
Make sure that you have edited the makedefs file, where the macros P, A, E, V 
and FIGS should be defined. This makedefs file is automatically included in 
your tar/zip file.

The command to build, check, and package the manuscript is:

      make pdf check tar

If there are problems typesetting your paper, your copy of the .pdf file for
the paper will at least show the editors what you expected it to look like. If
you have already supplied a paper copy of the copyright form, you do not need
to include this. Note that electronic signatures are not acceptable - sign the
form and scan it.

(Zip files are also acceptable, using the same naming convention, e.g. O12_v1.zip.)

Submit the paper
----------------

Submit the .tar file as instructed on the ADASS 2025 web site. If you need to
submit a revised version, submit ALL the required files in a new .tar file - do
not just submit the modified files - and append a version number to the name,
e.g. O12_v2.tar. This version is defined in the V= parameter in the makedefs file.

To sum up, here is an example of the files (no sub-directories please) that the editors
like to see:

   O12.tex
   O12.bib
   O12_f1.jpg
   O12_f2.jpg
   makedefs
   O12.pdf

you really don't need to send us *any* other type files. Save the electrons!


File index
==========

The ADASS2025.tar package contains the following files:

README                     - this file.
README.tldr                - an even shorter reminder how to submit
Makefile                   - useful for those who like terminal commands
makedefs                   - author macros to be included by the Makefile

ManuscriptInstructions.pdf - Guidelines for preparing an ADASS paper

ADASS_template.tex         - an example template file for an ADASS 2018 paper.
example.bib                - an example BibTeX file used by ADASS_template.tex
example.jpg                - an example graphics file used by ADASS_template.tex

ADASS_template.pdf         - the result of running LaTeX on ADASS_template.tex

asp2021.bst                - the required ASP bibliography style file.
asp2021.sty                - the required ASP LaTeX style file.

PaperCheck.py              - a Python script used to check an ADASS paper
Index.py                   - a Python script used to generate subject index entries
Aindex.py                  - a Python script used helping to ...
FixUnprintable.py          - a Python script used helping to ...
ascl.py                    - a python script to suggest ASCL entries
AdassChecks.py             - a Python module used by PaperCheck.py
TexScanner.py              - a Python module used by AdassChecks.py
AdassConfig.py             - a Python module used by Index.py
AdassIndex.py              - a Python module used by Index.py
detect_tex.py              - helper program to find your tex file. Set P= to fix conflicts.

subjectKeywords.txt        - set of recent subject index entries, used by Index.py
asclKeywords.txt           - list of ASCL codes for the ascl.py checker

manual2010.pdf             - The ASP "Instructions for Authors and Editors".
copyrightform.pdf          - The ASP copyright form


Github
======

Although each ADASS conference will draw its proceedings preparation package, the original github
repo from which that package is drawn, is available on https://github.com/astroumd/ADASSProceedings
Typically each year will develop the new release on a branch (e.g. "2025" for the Canada version)
and merge this back to the master for the next year team goes to work.

Authors will not need to know about that, but you may run into some editor specific comments or
commands in the Makefile or the python scripts. 

good luck!

Latex
=====

If pdflatex is not present on your system, you may need to use a package manager. Each system has
their package manager and set of package names. **texlive** is probably the most common package.
Here are a few:

Linux/Ubuntu(debian):  "sudo apt install"
     texlive texlive-base texlive-bibtex-extra texlive-binaries
     texlive-fonts-recommended texlive-lang-greek texlive-latex-base
     texlive-latex-extra texlive-latex-recommended texlive-pictures
     texlive-plain-generic texlive-publishers texlive-science
     texlive-xetex

Linux/Redhat:  "sudo dnf install"
     @texlive
     
MacOS/brew: "brew install"
     texlive

